-




                                                                          Precision casting material





The metal materials of precision casting enterprises mainly come from purchased materials, waste castings and pouring risers of the company. The purchased metal materials are often in bulk, and they are rarely pressed into a cylindrical shape. Materials of different materials are easily confused. For example, 316 materials are mixed with 304 or 430 materials. Therefore, precision casting companies should choose to purchase materials that are pressed into a cylindrical shape. The chemical composition of each batch of purchased materials was analyzed using a spectrum analyzer. If possible, the supplier should conduct a site visit to evaluate whether the materials are labeled, protected, and isolated.
For the scrap steel (waste castings, pouring risers) of the enterprise, it is necessary to remove rust, remove oil, clean sand and clean and dry, and control the S and P components. Moreover, the scrap of different materials should be marked, protected, and stored separately, and should not be confused.

评论

发表评论

此博客中的热门博文

-
                Ten things that must be paid attention to in precision casting! 1. Unblock all obstacles to the channel and site. 2. Check if the ladle is dry, whether the bottom of the bag, the ear, the bag and the end are safe and reliable, and whether the rotation is flexible. Do not use dry Iron ladle. 3, all tools in contact with molten iron, must be preheated to 500 degrees Celsius before use, otherwise it should not be used. 4, the ladle should not exceed 80% of the volume, the ladle should be smooth and slow, keep the steps to prevent the overflow of molten iron. Cast iron 5, before the crane crane should check the iron of the hook, the chain is reliable, the chain is not allowed to knot, there is a person responsible for tracking the iron in the water There must be no staff on the line. 6. Strictly implement the "six will not fall": (1) The temperature of molten iron is not enough; (2) The molten iron grade is not poured; (3) does not b
阅读全文
-
图片
                                                                   Factors affecting the surface roughness of stainless steel castings Surface roughness is another major quality indicator for stainless steel castings , generally less than 3.2 μm, between 0.8 and 3.2 μm. There are many factors affecting the surface roughness of castings, such as the pressure type, the surface quality of the investment and stainless steel, the casting process, the type of alloy and other factors. (1) Profile and investment surface quality. The surface roughness of the investment mold is the most important part affecting the surface roughness of the casting, and it is related to the surface quality of the molding, the compression molding method and the pressing process parameters. (2) Stainless steel surface quality. Stainless steel is a columnar columnar structure network, and refractory materials, additives, and water are filled in the middle, so that there are pores of different sizes on the su
阅读全文