-



                                       Casting temperature and mechanical properties of stainless steel precision casting






Stainless steel precision casting is made in the process of making it because of the small size of the transition zone, which will make it have good mechanical properties. Stainless steel precision casting can effectively meet the fluidity and the formation of bright crystals to a certain extent. The temperature is 715~740 °C.

The stainless steel precision cast round ingot has a relatively low crack tendency, so that it can be effectively guaranteed to a certain extent that its alloy has its good exhaust gas filling ability, and can effectively create its sequence close condition when used. The density can be effectively increased, and the casting temperature is generally relatively high.

The manufacturing temperature of stainless steel precision casting can effectively ensure that the melt has good fluidity during the transfer process, and the equipment needs to effectively transfer the distance according to the temperature during the casting process. Some factors such as the temperature drop during the transfer process are effectively determined.

The use temperature of stainless steel precision casting is effective to ensure that its melt will have good fluidity during the transfer process. The precision casting temperature of stainless steel should be selected according to the distance of transfer, the temperature drop during the transfer process, alloy, specification, flow rate, etc. Factors to determine.

Stainless steel precision casting has higher mechanical properties than cast iron in the process of use, but such materials have poorer properties of cast iron. The precision of stainless steel precision casting is relative to other materials during the production process. It is higher.

Stainless steel precision casting is the main disadvantage of its surface. It is a pit. If the product has such a phenomenon, it can only be disposed of in the process of use. This will result in an increase in our production cost and is not conducive to the product resources. Savings.

评论

发表评论

此博客中的热门博文

-
                Ten things that must be paid attention to in precision casting! 1. Unblock all obstacles to the channel and site. 2. Check if the ladle is dry, whether the bottom of the bag, the ear, the bag and the end are safe and reliable, and whether the rotation is flexible. Do not use dry Iron ladle. 3, all tools in contact with molten iron, must be preheated to 500 degrees Celsius before use, otherwise it should not be used. 4, the ladle should not exceed 80% of the volume, the ladle should be smooth and slow, keep the steps to prevent the overflow of molten iron. Cast iron 5, before the crane crane should check the iron of the hook, the chain is reliable, the chain is not allowed to knot, there is a person responsible for tracking the iron in the water There must be no staff on the line. 6. Strictly implement the "six will not fall": (1) The temperature of molten iron is not enough; (2) The molten iron grade is not poured; (3) does not b
阅读全文
-
图片
                                                                   Factors affecting the surface roughness of stainless steel castings Surface roughness is another major quality indicator for stainless steel castings , generally less than 3.2 μm, between 0.8 and 3.2 μm. There are many factors affecting the surface roughness of castings, such as the pressure type, the surface quality of the investment and stainless steel, the casting process, the type of alloy and other factors. (1) Profile and investment surface quality. The surface roughness of the investment mold is the most important part affecting the surface roughness of the casting, and it is related to the surface quality of the molding, the compression molding method and the pressing process parameters. (2) Stainless steel surface quality. Stainless steel is a columnar columnar structure network, and refractory materials, additives, and water are filled in the middle, so that there are pores of different sizes on the su
阅读全文